Marvel Super Heroes Vs. Street Fighter Problem

Ninty64XNinty64X
in Help Wanted!
Hey everyone, I just got Marvel Super Heroes Vs. Street Fighter for the Saturn, and have the Action Replay that allows imports to be played, but there's no dice. I go through the Action Replay's menu, the game loads, goes through the Capcom logo, and after the copyright screen goes to the normal Saturn menu and says "Cartridge unsuitable for this system". I tried Panzer Dragoon (US) with the Action Replay in to see if that was the issue, but it works fine. So, is it something wrong with the disk, system, or something else?



Thanks in advance. 

Comments

  • SomaSoma
    Try taking the action replay cart out carefully and reinserting it back in. That cart connector on the Saturn is very sensitive and sometimes the extra RAM that is required to play MSHvSF is not being read by the system due to poor cart contact.
  • VGS_captmorgandrinkerVGS_captmorgandrinker
    With X-Men vs Street Fighter, you need to use the specific RAM cart that comes with it, so I couldn't play mine until I had my system region-modded. Might be the same thing you're running into.
  • SomaSoma
    Originally posted by: captmorgandrinker

    With X-Men vs Street Fighter, you need to use the specific RAM cart that comes with it, so I couldn't play mine until I had my system region-modded. Might be the same thing you're running into.




    If he has the grey Action Replay Plus it should be able to play on a US saturn. I've had the same problem before and the solution was to reinsert the cart until it worked. Again the cart connector on the Saturn is really fickle and sensitive.
  • Ninty64XNinty64X
    I've reinserted the cart a bunch of times now, but still nothing. Are there any specific tips I should know to get it right?
  • neutopia6neutopia6
    The cart slot on the Saturn is ridiculously sensitive for some reason, my advice is to fuck around with it a bit
  • teh lurvteh lurv
    Have you tried cleaning the pins on the Saturn connector?
  • SomaSoma
    Originally posted by: Ninty64X

    I've reinserted the cart a bunch of times now, but still nothing. Are there any specific tips I should know to get it right?




    If the cart connector does not look dirty or rusty (or appear to have bent pins) when you take the cart out, this is what I'd try to do: take the cart and gently put it in all the way, then gently pull it out about a millimeter. Then power your Saturn on and see if it's working. I'd try this a couple times all the while being very careful when pulling the cartridge. Keep pulling it out by the millimeter (after you power the system off!!!) and resetting the system until it works. If it still doesn't work, I would assume the cart connector is bad or the RAM in the AR+ is bad which is possible.
  • Prime2099Prime2099
    I had this issue before as well, but as already suggested cleaning the contacts and re-inserting carefully should get it to work. It's pretty finicky.
Sign In or Register to comment.