Making my first repros - Did I order the right stuff?
Hi all,
I've decided to make a couple of reproductions of romhacks I'd like to play. I suck at soldering so I ordered some PCB's and the board programmer from infiniteNES. Since no-one seems to be selling new plastic cases at the moment I'll be sacrificing a couple of commons for those (most likely my torn label terminator 2 and monopoly). I ordered a nintendo security bit so I can get them open, and plan to paint them using a spray paint designed for plastics. I'll probably design a couple labels myself and order them from NES-City unless someone has a better suggestion.
Anyway, one of the games is a Megaman 3 romhack (MMC3), and the other is a FInal Fantasy romhack (MMC1). Did I order the right stuff? I know the CHR rom in Megaman 3 is only 128k, and the one I ordered is 256k, will that be a problem?
Edit: I don't see my picture showing up, so here's what I ordered:
I've decided to make a couple of reproductions of romhacks I'd like to play. I suck at soldering so I ordered some PCB's and the board programmer from infiniteNES. Since no-one seems to be selling new plastic cases at the moment I'll be sacrificing a couple of commons for those (most likely my torn label terminator 2 and monopoly). I ordered a nintendo security bit so I can get them open, and plan to paint them using a spray paint designed for plastics. I'll probably design a couple labels myself and order them from NES-City unless someone has a better suggestion.
Anyway, one of the games is a Megaman 3 romhack (MMC3), and the other is a FInal Fantasy romhack (MMC1). Did I order the right stuff? I know the CHR rom in Megaman 3 is only 128k, and the one I ordered is 256k, will that be a problem?
Edit: I don't see my picture showing up, so here's what I ordered:
Kazzo NES/FC/SNES cartridge dumper/programmer Item# kazzo , Cartridge connector choices:: NES & SNES |
$25.00 USD |
1 |
$25.00 USD |
Full Flash Upgrade MMC3 Item# mmc3 flash , Flash memory sizes MMC3: PRG-ROM: 256KB, CHR-ROM: 256KB |
$5.00 USD |
1 |
$5.00 USD |
MMC3 CHR-ROM board Item# mmc3 CHR-ROM , MMC3 Just add PRG/CHR EPROM board:: MMC3 TLROM (no WRAM) |
$14.00 USD |
1 |
$14.00 USD |
Full Flash Upgrade MMC1 Item# mmc1 flash , Flash memory sizes MMC1: PRG-ROM: 256KB (for CHR-RAM boards) |
$3.00 USD |
1 |
$3.00 USD |
MMC1 CHR-RAM boards Item# mmc1 CHR-RAM , MMC1 Just add PRG EPROM board: MMC1 SNROM WRAM (w/Batt back) |
$14.00 USD |
1 |
$14.00 USD |
Comments