Also lower him on it so he is visible from the mud section up.
Have the mega everdrive logo be single line across the top.
Heres a bit of what you wanted... lol. Heres a creeper sonic leering at you though heh. Sorry, I wasnt following the "Also lower him on it so he is visible from the mud section up." Did you mean from the belly up centered over the "sega" logo hump?
Also lower him on it so he is visible from the mud section up.
Have the mega everdrive logo be single line across the top.
Heres a bit of what you wanted... lol. Heres a creeper sonic leering at you though heh. Sorry, I wasnt following the "Also lower him on it so he is visible from the mud section up." Did you mean from the belly up centered over the "sega" logo hump?
I don't think everdrive would fit all the way scross Also, put the krikzz logo to the left of the genesis bump in the green hills zone part, not in the gradient for the genesis bump
Also, I dont know if the font would make it look ok to be Mega ED. It would look like MEGA ED, since it has no lower case. Some mega dude named ed is what I think of when I see that lol. I can re-situate it so so that its on top and bottom again for the top portion when I copy/resize it.
But for now, its time to visit the land of nod and catch some ZZZs
Also, I dont know if the font would make it look ok to be Mega ED. It would look like MEGA ED, since it has no lower case. Some mega dude named ed is what I think of when I see that lol. I can re-situate it so so that its on top and bottom again for the top portion when I copy/resize it.
But for now, its time to visit the land of nod and catch some ZZZs
Yes, the krikzz logo near where Sonic's nose is currently. I trust your opinion on the top label.
Do you work midnights? It seems you go to bed in the middle of the afternoon.
Eric, would you do the sonic label with that fancy NA logo and put green hill zone behind sonic?
I rather like that streets of rage one more then your first attempt at sonic.
Sure I like it . Any Idea for what you'd like the everdrive logo to look like?
Also, while im at it, heres what I've come up with for the gameboy one. I feel a little laser-y today lol. I still need to make up a logo yet though. thoughts? I may be an ESRB K-A icon above the nintendo. I had the gamepak icon there, but decided to move it.
I really like this one. I was thinking of making my own and it was gonna look pretty darn close to this.
still not sure what kind of label i'd want for my ED64. I know i'd like some kind of blackbox-like label for the N8. Maybe for the ED64 something similar to the Nintendo Ultra 64 logo before they finalized the name.
ill have plenty of time to figure it out though. hopfully towards the middle/end of next month ill be able to go to a store and hunt down a nice black cartridge game for my ED64.
still not sure what kind of label i'd want for my ED64. I know i'd like some kind of blackbox-like label for the N8. Maybe for the ED64 something similar to the Nintendo Ultra 64 logo before they finalized the name.
ill have plenty of time to figure it out though. hopfully towards the middle/end of next month ill be able to go to a store and hunt down a nice black cartridge game for my ED64.
Good stuff. I may do a few designs for the nes as well. One will definately be black box style, and maybe a konami version. Anyone have any thing they'd like to see in particular?
I'll look into the ultra 64 designs and see what I can come up with. I wasn't sure where I was gonna go with thtat one lol.
Anyone have any ideas for the TG-16/PCE? Im pretty unfamiliar with that one.
I really like this one. I was thinking of making my own and it was gonna look pretty darn close to this.
Thanks! Logo design will be worked on tonight.
Originally posted by: sazyario
Yes, the krikzz logo near where Sonic's nose is currently. I trust your opinion on the top label. Do you work midnights? It seems you go to bed in the middle of the afternoon.
Lol, yes. Got stuck working til noon earlier today. midnight to noon is horrible. I work 911 though, so if people arent beating each other up, wrecking their vehicles or dieing, I'm pretty free to do different things.
still not sure what kind of label i'd want for my ED64. I know i'd like some kind of blackbox-like label for the N8. Maybe for the ED64 something similar to the Nintendo Ultra 64 logo before they finalized the name.
ill have plenty of time to figure it out though. hopfully towards the middle/end of next month ill be able to go to a store and hunt down a nice black cartridge game for my ED64.
Good stuff. I may do a few designs for the nes as well. One will definately be black box style, and maybe a konami version. Anyone have any thing they'd like to see in particular?
I'll look into the ultra 64 designs and see what I can come up with. I wasn't sure where I was gonna go with thtat one lol.
Anyone have any ideas for the TG-16/PCE? Im pretty unfamiliar with that one.
Are you going to make it for in the label area for the 3D printed cover on it? I'd go simplistic. Use the turbo grafx 16 logo and underneath write everdrive in as close of a matching font as possible. The black on ?orange? Should be ok.
yea, from that buffalo place or shapeways or whatever it is. I was thinking simplistic too, since the area is pretty small. Any idea what size I'm looking at?
yea, from that buffalo place or shapeways or whatever it is. I was thinking simplistic too, since the area is pretty small. Any idea what size I'm looking at?
I believe he has the dimensions on his thread at assembler games. I'm not sure what page number. I'm unsure how I feel about the 64 label. I'm rather biased against the console as a whole. Plus there isn't some sort of standard or template to work on like snes/nes games.
I'm officially on vacation everyone. I have not yet received any shipping information from Retrogate.
I searched that entire thread and may have overlooked the sizing of the label portion and there are regular sizes I saw but not relating to the actual label area. I contacted shapeways to see if they'll pass it on. if not, ill ask him on assembler.
For N64 I do love that one guys label that looks a little "super mario galaxyish". I may see if I can ask to rework the logos to make it appear more OEM (N64 square logo, krikxx logo [in place of developer logo] and NA seal).
I searched that entire thread and may have overlooked the sizing of the label portion and there are regular sizes I saw but not relating to the actual label area. I contacted shapeways to see if they'll pass it on. if not, ill ask him on assembler.
For N64 I do love that one guys label that looks a little "super mario galaxyish". I may see if I can ask to rework the logos to make it appear more OEM (N64 square logo, krikxx logo [in place of developer logo] and NA seal).
After thinking about the logo a bit, im not sure how well the ultra64 logo would go. but just an idea for a simple N64 label would a logo similar to the one on the front of the console, but replace "NINTENDO" with "EVERDRIVE"
Also, for the N8, if you pick some other game to have a look-a-like cover, i'd like to see how a Castlevania logo would turn out w/ everdrive.
I also had an idea for the blackbox one. or just an idea for some kind of logo in general. I thought it'd be neat to have an NES console on there, with the door open and an SD card sliding into the slot instead of a game.
After thinking about the logo a bit, im not sure how well the ultra64 logo would go. but just an idea for a simple N64 label would a logo similar to the one on the front of the console, but replace "NINTENDO" with "EVERDRIVE"
Also, for the N8, if you pick some other game to have a look-a-like cover, i'd like to see how a Castlevania logo would turn out w/ everdrive.
I also had an idea for the blackbox one. or just an idea for some kind of logo in general. I thought it'd be neat to have an NES console on there, with the door open and an SD card sliding into the slot instead of a game.
Good ideas, I'll see what I can come up with.
Originally posted by: crans
The labels are nucking futs! How can we get them printed of and where?
As soon as I get them completed, i'll post em all in one spot and put up a little order dealie together with ethe one guy from atari age. it'll probably be about 4$ a label or so when alls said and done. Not makin money, just doin it for fun lol. I'm hoping to have all the labels at least mostly together when Sazyrio comes back.
There will be at least a third package from them to be delivered to me.
This may hold me from delivering to those of you waiting on unshipped everdrives.
Thanks for the update. Are you waiting until all of the packages arrive before you start shipping out? Did they give you a packing list of which ones were shipped and which ones you're still waiting on? Dibs on the first Turbo!
I also had an idea for the blackbox one. or just an idea for some kind of logo in general. I thought it'd be neat to have an NES console on there, with the door open and an SD card sliding into the slot instead of a game.
unpolished, but heres one for the N8 via the last suggestion there.
EDIT below to add sd2snes label ive come up with as well.
And heres what I've come up with the for SD2SNES.
Nintendo seal will be changed when we decide upon what you guys may want for that (no NA logo).
Also, I'm not feelin the background image much myself. I tried the main full map and that look horrid. Anyone have any suggestions?
Ok, so this is almost a joke, but heres this too lol. I probably spent way too much time putting this together but oh well lol.
I actually pulled the original full artwork out and redid the entire main image. If you look up the original box cover, you can see I left a lot more of the original image on the cover.
Also, when I saved the png version it was before I saw the errors at the bottom. those have already been corrected.
Also, in case I need to say it, nothing is absolutely finished. These are just some ideas I put together and will follow up on depending on input.
Comments
Originally posted by: sazyario
Could you center sonic above the "bump".
Also lower him on it so he is visible from the mud section up.
Have the mega everdrive logo be single line across the top.
Heres a bit of what you wanted... lol. Heres a creeper sonic leering at you though heh. Sorry, I wasnt following the "Also lower him on it so he is visible from the mud section up." Did you mean from the belly up centered over the "sega" logo hump?
Originally posted by: sazyario
Could you center sonic above the "bump".
Also lower him on it so he is visible from the mud section up.
Have the mega everdrive logo be single line across the top.
Heres a bit of what you wanted... lol. Heres a creeper sonic leering at you though heh. Sorry, I wasnt following the "Also lower him on it so he is visible from the mud section up." Did you mean from the belly up centered over the "sega" logo hump?
Yes, that is exactly what I meant lol
I don't think everdrive would fit all the way scross
Also, put the krikzz logo to the left of the genesis bump in the green hills zone part, not in the gradient for the genesis bump
Also, I dont know if the font would make it look ok to be Mega ED. It would look like MEGA ED, since it has no lower case. Some mega dude named ed is what I think of when I see that lol. I can re-situate it so so that its on top and bottom again for the top portion when I copy/resize it.
But for now, its time to visit the land of nod and catch some ZZZs
Krikzz right beside sonic's nose, correct?
Also, I dont know if the font would make it look ok to be Mega ED. It would look like MEGA ED, since it has no lower case. Some mega dude named ed is what I think of when I see that lol. I can re-situate it so so that its on top and bottom again for the top portion when I copy/resize it.
But for now, its time to visit the land of nod and catch some ZZZs
Yes, the krikzz logo near where Sonic's nose is currently.
I trust your opinion on the top label.
Do you work midnights? It seems you go to bed in the middle of the afternoon.
Originally posted by: eric.of.troy
Originally posted by: sazyario
Eric, would you do the sonic label with that fancy NA logo and put green hill zone behind sonic?
I rather like that streets of rage one more then your first attempt at sonic.
Sure I like it . Any Idea for what you'd like the everdrive logo to look like?
Also, while im at it, heres what I've come up with for the gameboy one. I feel a little laser-y today lol. I still need to make up a logo yet though. thoughts? I may be an ESRB K-A icon above the nintendo. I had the gamepak icon there, but decided to move it.
I really like this one. I was thinking of making my own and it was gonna look pretty darn close to this.
ill have plenty of time to figure it out though. hopfully towards the middle/end of next month ill be able to go to a store and hunt down a nice black cartridge game for my ED64.
Originally posted by: dav3yb
still not sure what kind of label i'd want for my ED64. I know i'd like some kind of blackbox-like label for the N8. Maybe for the ED64 something similar to the Nintendo Ultra 64 logo before they finalized the name.
ill have plenty of time to figure it out though. hopfully towards the middle/end of next month ill be able to go to a store and hunt down a nice black cartridge game for my ED64.
Good stuff. I may do a few designs for the nes as well. One will definately be black box style, and maybe a konami version. Anyone have any thing they'd like to see in particular?
I'll look into the ultra 64 designs and see what I can come up with. I wasn't sure where I was gonna go with thtat one lol.
Anyone have any ideas for the TG-16/PCE? Im pretty unfamiliar with that one.
Originally posted by: Portabello
I really like this one. I was thinking of making my own and it was gonna look pretty darn close to this.
Thanks! Logo design will be worked on tonight.
Originally posted by: sazyario
Yes, the krikzz logo near where Sonic's nose is currently. I trust your opinion on the top label. Do you work midnights? It seems you go to bed in the middle of the afternoon.
Lol, yes. Got stuck working til noon earlier today. midnight to noon is horrible. I work 911 though, so if people arent beating each other up, wrecking their vehicles or dieing, I'm pretty free to do different things.
Originally posted by: dav3yb
still not sure what kind of label i'd want for my ED64. I know i'd like some kind of blackbox-like label for the N8. Maybe for the ED64 something similar to the Nintendo Ultra 64 logo before they finalized the name.
ill have plenty of time to figure it out though. hopfully towards the middle/end of next month ill be able to go to a store and hunt down a nice black cartridge game for my ED64.
Good stuff. I may do a few designs for the nes as well. One will definately be black box style, and maybe a konami version. Anyone have any thing they'd like to see in particular?
I'll look into the ultra 64 designs and see what I can come up with. I wasn't sure where I was gonna go with thtat one lol.
Anyone have any ideas for the TG-16/PCE? Im pretty unfamiliar with that one.
Are you going to make it for in the label area for the 3D printed cover on it?
I'd go simplistic. Use the turbo grafx 16 logo and underneath write everdrive in as close of a matching font as possible.
The black on ?orange? Should be ok.
Also, heres the ultradrive 64 logo. Thoughts?
http://img2.wikia.nocookie.net/__cb20130115013908/logopedia/images/8/82/Ultra_64_logo.jpg
yea, from that buffalo place or shapeways or whatever it is. I was thinking simplistic too, since the area is pretty small. Any idea what size I'm looking at?
Also, heres the ultradrive 64 logo. Thoughts?
http://img2.wikia.nocookie.net/__...
I believe he has the dimensions on his thread at assembler games. I'm not sure what page number.
I'm unsure how I feel about the 64 label. I'm rather biased against the console as a whole. Plus there isn't some sort of standard or template to work on like snes/nes games.
I'm officially on vacation everyone. I have not yet received any shipping information from Retrogate.
I searched that entire thread and may have overlooked the sizing of the label portion and there are regular sizes I saw but not relating to the actual label area. I contacted shapeways to see if they'll pass it on. if not, ill ask him on assembler.
For N64 I do love that one guys label that looks a little "super mario galaxyish". I may see if I can ask to rework the logos to make it appear more OEM (N64 square logo, krikxx logo [in place of developer logo] and NA seal).
Originally posted by: eric.of.troy
Have fun!
I searched that entire thread and may have overlooked the sizing of the label portion and there are regular sizes I saw but not relating to the actual label area. I contacted shapeways to see if they'll pass it on. if not, ill ask him on assembler.
For N64 I do love that one guys label that looks a little "super mario galaxyish". I may see if I can ask to rework the logos to make it appear more OEM (N64 square logo, krikxx logo [in place of developer logo] and NA seal).
After thinking about the logo a bit, im not sure how well the ultra64 logo would go. but just an idea for a simple N64 label would a logo similar to the one on the front of the console, but replace "NINTENDO" with "EVERDRIVE"
http://gametrog.com/goblin/images/nintendo-images-main/nintendo-n64-images/nintendo-64-front.png
Also, for the N8, if you pick some other game to have a look-a-like cover, i'd like to see how a Castlevania logo would turn out w/ everdrive.
I also had an idea for the blackbox one. or just an idea for some kind of logo in general. I thought it'd be neat to have an NES console on there, with the door open and an SD card sliding into the slot instead of a game.
Originally posted by: dav3yb
After thinking about the logo a bit, im not sure how well the ultra64 logo would go. but just an idea for a simple N64 label would a logo similar to the one on the front of the console, but replace "NINTENDO" with "EVERDRIVE"
http://gametrog.com/goblin/images...
Also, for the N8, if you pick some other game to have a look-a-like cover, i'd like to see how a Castlevania logo would turn out w/ everdrive.
I also had an idea for the blackbox one. or just an idea for some kind of logo in general. I thought it'd be neat to have an NES console on there, with the door open and an SD card sliding into the slot instead of a game.
Good ideas, I'll see what I can come up with.
Originally posted by: crans
The labels are nucking futs! How can we get them printed of and where?
As soon as I get them completed, i'll post em all in one spot and put up a little order dealie together with ethe one guy from atari age. it'll probably be about 4$ a label or so when alls said and done. Not makin money, just doin it for fun lol. I'm hoping to have all the labels at least mostly together when Sazyrio comes back.
Is there a second chance list I could jump on?
Not just yet next month or oct
Anybody create a page to just post the Everdrive Stickers?
Its getting hard to manage in here.
I for one would like to see where I can purchase the designs myself.
Thanks,
Debu
I got two tracking numbers from Retrogate.
There will be at least a third package from them to be delivered to me.
This may hold me from delivering to those of you waiting on unshipped everdrives.
Originally posted by: sazyario
Quick update.
I got two tracking numbers from Retrogate.
There will be at least a third package from them to be delivered to me.
This may hold me from delivering to those of you waiting on unshipped everdrives.
Thanks for the update. Are you waiting until all of the packages arrive before you start shipping out? Did they give you a packing list of which ones were shipped and which ones you're still waiting on? Dibs on the first Turbo!
Besides that it will probably be 10 days before I have anything in my hands
Originally posted by: khog143
Here is from another forum for a TG16 label. I think it looks great.
Yea I've been working on a design as well for turbo everdrive using those dimensions. I'll post it when I get home.
Originally posted by: dav3yb
I also had an idea for the blackbox one. or just an idea for some kind of logo in general. I thought it'd be neat to have an NES console on there, with the door open and an SD card sliding into the slot instead of a game.
unpolished, but heres one for the N8 via the last suggestion there.
EDIT below to add sd2snes label ive come up with as well.
And heres what I've come up with the for SD2SNES.
Nintendo seal will be changed when we decide upon what you guys may want for that (no NA logo).
Also, I'm not feelin the background image much myself. I tried the main full map and that look horrid. Anyone have any suggestions?
I actually pulled the original full artwork out and redid the entire main image. If you look up the original box cover, you can see I left a lot more of the original image on the cover.
Also, when I saved the png version it was before I saw the errors at the bottom. those have already been corrected.
Also, in case I need to say it, nothing is absolutely finished. These are just some ideas I put together and will follow up on depending on input.