Label Printing Service
UPDATE: I am available for label printing again. But please note that I do this on the side and will do my best to get you your labels as expeditiously as possible. I also do custom requests for design (above and beyond labels as well)! I do not frequently check this thread, so again, please PM me for requests. Based on availability, I may also have special label papers (gold/silver foil, clear, etc) for an extra charge.
Hey everyone!
I just wanted to post a nice new update for everyone. After a good while of testing, I finally worked out everything out and can now print AND die cut labels! I've also gotten a gorgeous new high end label material thats just the bee's knees. Its not really paper, its more of a plastic (definitely not the cheap vinyl stuff many stickers are made of) and its weatherproof and glossy. They have excellent adhesion and they have no need for a laminate, believe me. I did some rigorous stress testing on these and only sharp metal would really do anything against them which is something that even most laminates cant protect against lol. I've even put one on my bumper and its still fully stuck even through a horrible snowy winter! Labels don't come any nicer.
My services are open for any labels that you may need printed, not just the ones I have below.
I have had a few people ask about reproduction labels. I have a number of hacks/translations that I have done. If you would like something custom designed, it will be an extra charge we can work out the price. I have a list of things I want to design myself, so if its on that, all the better lol. Anything you wish to have custom designed, I will make sure to email you the full resolution image as well!
If you are designing them yourself, please give me a 1mm bleed around the outside. If the labels are for anything out of the ordinary, make sure to send proper sizes of the finished product.
Price will be 3$ per label. If you would like to inquire about bulk pricing, please ask!
Please keep in mind if you are only requesting a label or two, there may be a slight delay. In an effort to save you some money, I will offer standard envelope shipping for $1.50 unless you request otherwise. Any large order will be shipped via flat rate priority.
I do request any orders be sent through a PM or sending me a transaction. It may get missed if you ask on this thread.
Any questions, please ask!
Here are the everdrive labels that I've made up, some with collaboration of other members, one that is a reworking of spoonTRex's artwork with his permission, and some slightredesign/palatte change of the classic famicom pulse.
NOTE: Both everdrive labels were designed for the following two shells listed on shapeways
Regular version
Low-Profile version
Comments
I'll take a N8 and TG16 one.
Not have creeper sonic.
Originally posted by: sazyario
I thought you were going to move sonic?
Not have creeper sonic.
Hah, sorry I thought you liked creeper sonic. I can do that.
Originally posted by: sazyario
I thought you were going to move sonic?
Not have creeper sonic.
Hah, sorry I thought you liked creeper sonic. I can do that.
Also, what happened to the other nes label?
It's a shame you scrapped that design.
Originally posted by: sazyario
Originally posted by: eric.of.troy
Originally posted by: sazyario
I thought you were going to move sonic?
Not have creeper sonic.
Hah, sorry I thought you liked creeper sonic. I can do that.
Also, what happened to the other nes label? It's a shame you scrapped that design.
Which one? The Castlevania one? I actually spent a bit more time on it. and can toss that one up too. (it was a box template that i posted earlier that needed resized to a label portion)
That or the SD card one?
Also, I tossed up the edited mega everdrive one.
Originally posted by: IrishNinja
yeah, down to see the CV one...also i kinda miss creeper sonic
Hah, If you like the creeper sonic, I still have the files. That and I'll try to clean up the castlevania one and drop that down tonight too. There was the black box version with the SD card popping out if theres interest in that one.
Also, freebump for you.
Originally posted by: Milkshanks
Sorry for "hijacking" your thread like this but... Do you know where I could buy everdrives? Specially Everdrive 64 and SD2SNES. I was trying to buy on stoneagegamer but there's a really long waitlist on those.
Also, freebump for you.
http://shop.retrogate.com/
Also I added the castlevania one to the above list.
Originally posted by: eric.of.troy
Originally posted by: Milkshanks
Sorry for "hijacking" your thread like this but... Do you know where I could buy everdrives? Specially Everdrive 64 and SD2SNES. I was trying to buy on stoneagegamer but there's a really long waitlist on those.
Also, freebump for you.
http://shop.retrogate.com/
Also I added the castlevania one to the above list.
But that ships from Ukraine right? I was looking for a US seller
Originally posted by: Milkshanks
Originally posted by: eric.of.troy
Originally posted by: Milkshanks
Sorry for "hijacking" your thread like this but... Do you know where I could buy everdrives? Specially Everdrive 64 and SD2SNES. I was trying to buy on stoneagegamer but there's a really long waitlist on those.
Also, freebump for you.
http://shop.retrogate.com/
Also I added the castlevania one to the above list.
But that ships from Ukraine right? I was looking for a US seller
Gotcha. Check here. I'm not sure who all on that list is US based, but thats a start.
Sorry for "hijacking" your thread like this but... Do you know where I could buy everdrives? Specially Everdrive 64 and SD2SNES. I was trying to buy on stoneagegamer but there's a really long waitlist on those.
Also, freebump for you.
<br /
Check out my group purchase collaboration. I will be doing another run of discounted everdrives in October.
If you're going to wait might as well save money
Originally posted by: eric.of.troy
Originally posted by: Milkshanks
Sorry for "hijacking" your thread like this but... Do you know where I could buy everdrives? Specially Everdrive 64 and SD2SNES. I was trying to buy on stoneagegamer but there's a really long waitlist on those.
Also, freebump for you.
http://shop.retrogate.com/
Also I added the castlevania one to the above list.
But that ships from Ukraine right? I was looking for a US seller
I suggest you just go with Stoneage Gamer. I was on a wait list too and for whatever reason I got it in a week instead of of the estimated 4 weeks I was supposed to wait for.
Thanks to TrekMD pointing out a glaring oversight with the zelda label.
Stupid me wasnt paying attention to the many templates I have strewn about my photoshop folder used a blackbox template. Not a blackbox label template.
While this shouldn't be a huge issue to fix, I'll get huge correction up there asap.
EDIT: Proper sizing complete.
In case you guys care to know, the most popular ones are the black turboED, zelda N8, and the megaED all tied at 6.
One thing to note:
Comapring them, I think the two turboED shells I have posted about have different radii on the corners.
I will double check with him and make sure.
"The "classic" (the regular shell) is 38mm x 30.75mm x R1.5mm (Width x Height x Radius) for the current revision. Since that earlier post in the forum I had rounded the top edge to ease off the sharp edge so that explains the slight shorter height.
As for the the super low profile, the dimension is 46mm x 32mm x R0.5mm.
I personally think subtracting 1mm off each edges might be easier for applying the label and account for any irregularity from the 3D print."
I'll be in touch with those who have already placed their order with me to see which they would prefer.
Originally posted by: dballin
I really like the GB one, but not too crazy about the SD2SNES label. Not too crazy about any of the other ones available online either so I guess I'll just live with Yoshi instead of a blank cart. Put me down for a GB and a SD2SNES please.
regarding the SD2SNES, If theres something specific and not too crazy, I can swing something together for ya.
The logo itself is already made, as is the template, its just recreating some sorta background art. If its something as simple as getting character art and a screenshot on there, depending on the quality/available of the games art, it could take almost no time. If its something with a flagship character I could probably whip it up in 10-15 minutes. IE, theres tons of samus art out there, and I could give either use a screenshot from a room or intro for it. Or give the entire background a look like the sonic one which is less of an OEM look, but still looks cool.
Just lemme know!
Also, reminder to everyone else that I'd like to send these off shortly at 5pm today to him. If there are some stragglers, lemme know quick so I can update him!
Originally posted by: mink03
Put me down for a Nintendo NES N8 label (Zelda version) ! I need one of these for sure.
I'm gonna shoot you a PM.