Lagrange Point audio problem on toaster
I have a famicom Lagrange Point cartridge, and I have the enio EXP board installed on my toaster.
I hooked it up through the pin adapter and after a little effort, the title screen came up and sound was made when I hit start to play. After that, it was silence where there was supposed to be music playing.
Is there something more that needs to be done beyond the exp board to get the music? (ie soldering) Is this a Lagrage specific problem (I know it's a unique title)
I hooked it up through the pin adapter and after a little effort, the title screen came up and sound was made when I hit start to play. After that, it was silence where there was supposed to be music playing.
Is there something more that needs to be done beyond the exp board to get the music? (ie soldering) Is this a Lagrage specific problem (I know it's a unique title)
Comments
I believe it depends on the converter, honestly.
It's been awhile since I looked into it, but I believe you will need to make sure that your converter has a jumper wire from pin 46 of the FC side to pin 54 of the NES side. The ENIO EXP already has the 47K resistor at EXP6 so you should be good to go there.
http://wiki.nesdev.com/w/index.php/Cartridge_connector
http://enio.chykn.com/wiki/index.php/ENIO_EXP_Board