So who was the person found to get labels from? Also does anyone have a pic of how they look?
That was me. I originally contacted Pboland for the labels. Hes a member over at atari age.
If you check the label post a bit down in the first post you'll see a pic I took of my everdrive using his labels.
Also, I did pick up a good printer that can do the same quality labels. I'm in the search for some label sheets with better adhesive though. What paper I have is good for stuff like the gameboy/n64/etc labels that dont have a bend at the top. The paper I have now holds well to flat surfaces, but doesnt do so well at the top bend of the nes/snes/genesis carts. I have some new stuff coming next week, and if that doesnt cut it, I have another well reputed avenue I just found out about that I should be able to go to for some high end label paper.
I'm not doing any mass orders right now, but if ya need a label or so, send me a message and I can put ya on a list.
So who was the person found to get labels from? Also does anyone have a pic of how they look?
That was me. I originally contacted Pboland for the labels. Hes a member over at atari age.
If you check the label post a bit down in the first post you'll see a pic I took of my everdrive using his labels.
Also, I did pick up a good printer that can do the same quality labels. I'm in the search for some label sheets with better adhesive though. What paper I have is good for stuff like the gameboy/n64/etc labels that dont have a bend at the top. The paper I have now holds well to flat surfaces, but doesnt do so well at the top bend of the nes/snes/genesis carts. I have some new stuff coming next week, and if that doesnt cut it, I have another well reputed avenue I just found out about that I should be able to go to for some high end label paper.
I'm not doing any mass orders right now, but if ya need a label or so, send me a message and I can put ya on a list.
Chet, yours is the last getting prepared.... PayPal just shut me down...
I'm trying to resolve with 24 hour support...
This is so aggravating. All the money I've made doing my console mods the last couple of months, plus the little bit of money I'm making off of Cartridge Shells for the EDs is all tied up in my account...
So who was the person found to get labels from? Also does anyone have a pic of how they look?
That was me. I originally contacted Pboland for the labels. Hes a member over at atari age.
If you check the label post a bit down in the first post you'll see a pic I took of my everdrive using his labels.
Also, I did pick up a good printer that can do the same quality labels. I'm in the search for some label sheets with better adhesive though. What paper I have is good for stuff like the gameboy/n64/etc labels that dont have a bend at the top. The paper I have now holds well to flat surfaces, but doesnt do so well at the top bend of the nes/snes/genesis carts. I have some new stuff coming next week, and if that doesnt cut it, I have another well reputed avenue I just found out about that I should be able to go to for some high end label paper.
I'm not doing any mass orders right now, but if ya need a label or so, send me a message and I can put ya on a list.
Thanks!
are those labels laminated?
Mine are from Round 1 of labels. But those weren't done by Eric.
Eric, would you be able to do another Sega Everdrive for me but with the correct template?
Chet, yours is the last getting prepared.... PayPal just shut me down...
I'm trying to resolve with 24 hour support...
This is so aggravating. All the money I've made doing my console mods the last couple of months, plus the little bit of money I'm making off of Cartridge Shells for the EDs is all tied up in my account...
That sucks, hope you can get it worked out.
Partially the reason i dont do a lot with paypal outside of using it as a payment method. I rarely keep any money in it.
Got paypal resolved... I've been packing these and doing cartridge shells for 7 hours straight.
(I watched almost all of Season 1 of Yu-Gi-Oh! in one sitting....)
I have 6 more people's orders to do. These all require cartridge shells.
They may have to wait until next weekend. I have console mods to do before the end of today (Sunday).
The 18 of you who I have done today, your orders will be going out on monday as long as work doesn't dispatch me.
You should have gotten an email from paypal telling you they shipped. This is incorrect, I have created the shipping label which automatically marks it as being shipped.
Does anyone who already has an everdrive want to talk about what we need to do to prepare for these things? Specifically, what kind of (legal) roms do we need and in what file format, how the folders on our SD card should be structured, etc?
Does anyone who already has an everdrive want to talk about what we need to do to prepare for these things? Specifically, what kind of (legal) roms do we need and in what file format, how the folders on our SD card should be structured, etc?
"Legal" roms? Lol, you own a copy nes and dump your own roms?
Does anyone who already has an everdrive want to talk about what we need to do to prepare for these things? Specifically, what kind of (legal) roms do we need and in what file format, how the folders on our SD card should be structured, etc?
"Legal" roms? Lol, you own a copy nes and dump your own roms?
Well, or roms that people make on their own and release to the public for free. I'm sure NA doesn't condone the using of illegal roms and the decimation of information on how to use them.
Does anyone who already has an everdrive want to talk about what we need to do to prepare for these things? Specifically, what kind of (legal) roms do we need and in what file format, how the folders on our SD card should be structured, etc?
"Legal" roms? Lol, you own a copy nes and dump your own roms?
Well, or roms that people make on their own and release to the public for free. I'm sure NA doesn't condone the using of illegal roms and the decimation of information on how to use them.
Well, Eric and I tried to get permission to use the NA logo on the Everdrive labels and we were politely told no. NA is already having some legal problems regarding roms and such. NA doesn't want to officially be associated with pirating.
The sd2snes is a pain in the ass. Filing out the usb & sd card slot so close together is terrible. Plus filing the cart edge plastic to allow the extra pins.
Comments
The day the packages show up on my doorstep will be the closest thing I have to Christmas this year. Very excited.
I hope this really makes you happy.
Originally posted by: sazyario
Originally posted by: MrNESGuy
The day the packages show up on my doorstep will be the closest thing I have to Christmas this year. Very excited.
I hope this really makes you happy.
You have no idea. I'm very VERY thankful for you putting this together. I wouldn't have been arsed to get off my own butt and do it myself.
I wonder what these are???
I'll start shipping by the end of next week.
I need to order bubble mailers. (Cheaper then buying them off the shelf at staples or office max)
So who was the person found to get labels from? Also does anyone have a pic of how they look?
Eric.of.troy
He doesn't print them himself. He did like I did, did a group purchase to save everyone money.
Originally posted by: sazyario
Well, I have 2 packages in my hands from the Ukraine.
I wonder what these are???
I'll start shipping by the end of next week.
I need to order bubble mailers. (Cheaper then buying them off the shelf at staples or office max)
Sweet! Super excited about this!! Not sure if i said it before but thanks again for setting this up!
So, for people who are not getting the Cartridge Shell Service will be getting their's first.
Originally posted by: dav3yb
So who was the person found to get labels from? Also does anyone have a pic of how they look?
That was me. I originally contacted Pboland for the labels. Hes a member over at atari age.
If you check the label post a bit down in the first post you'll see a pic I took of my everdrive using his labels.
Also, I did pick up a good printer that can do the same quality labels. I'm in the search for some label sheets with better adhesive though. What paper I have is good for stuff like the gameboy/n64/etc labels that dont have a bend at the top. The paper I have now holds well to flat surfaces, but doesnt do so well at the top bend of the nes/snes/genesis carts. I have some new stuff coming next week, and if that doesnt cut it, I have another well reputed avenue I just found out about that I should be able to go to for some high end label paper.
I'm not doing any mass orders right now, but if ya need a label or so, send me a message and I can put ya on a list.
Thanks!
Originally posted by: sazyario
So, for people who are not getting the Cartridge Shell Service will be getting their's first.
Awesome.
I actually picked up a shell for mine yesterday.
Too bad I'm moving soon and all my games are packed away...
Originally posted by: eric.of.troy
Originally posted by: dav3yb
So who was the person found to get labels from? Also does anyone have a pic of how they look?
That was me. I originally contacted Pboland for the labels. Hes a member over at atari age.
If you check the label post a bit down in the first post you'll see a pic I took of my everdrive using his labels.
Also, I did pick up a good printer that can do the same quality labels. I'm in the search for some label sheets with better adhesive though. What paper I have is good for stuff like the gameboy/n64/etc labels that dont have a bend at the top. The paper I have now holds well to flat surfaces, but doesnt do so well at the top bend of the nes/snes/genesis carts. I have some new stuff coming next week, and if that doesnt cut it, I have another well reputed avenue I just found out about that I should be able to go to for some high end label paper.
I'm not doing any mass orders right now, but if ya need a label or so, send me a message and I can put ya on a list.
Thanks!
are those labels laminated?
Originally posted by: dav3yb
the GB everdrive comes with a shell right? or am i just crazy?
Aye sir, they do.
Thanks again for using your spare time to do this Sazyario!
We all appreciate it.
I'm trying to resolve with 24 hour support...
This is so aggravating. All the money I've made doing my console mods the last couple of months, plus the little bit of money I'm making off of Cartridge Shells for the EDs is all tied up in my account...
Originally posted by: dav3yb
Originally posted by: eric.of.troy
Originally posted by: dav3yb
So who was the person found to get labels from? Also does anyone have a pic of how they look?
That was me. I originally contacted Pboland for the labels. Hes a member over at atari age.
If you check the label post a bit down in the first post you'll see a pic I took of my everdrive using his labels.
Also, I did pick up a good printer that can do the same quality labels. I'm in the search for some label sheets with better adhesive though. What paper I have is good for stuff like the gameboy/n64/etc labels that dont have a bend at the top. The paper I have now holds well to flat surfaces, but doesnt do so well at the top bend of the nes/snes/genesis carts. I have some new stuff coming next week, and if that doesnt cut it, I have another well reputed avenue I just found out about that I should be able to go to for some high end label paper.
I'm not doing any mass orders right now, but if ya need a label or so, send me a message and I can put ya on a list.
Thanks!
are those labels laminated?
Mine are from Round 1 of labels. But those weren't done by Eric.
Eric, would you be able to do another Sega Everdrive for me but with the correct template?
I'll pay again of course
As soon as I get it figured out, I'll shoot ya an invoice!
Originally posted by: sazyario
Chet, yours is the last getting prepared.... PayPal just shut me down...
I'm trying to resolve with 24 hour support...
This is so aggravating. All the money I've made doing my console mods the last couple of months, plus the little bit of money I'm making off of Cartridge Shells for the EDs is all tied up in my account...
That sucks, hope you can get it worked out.
Partially the reason i dont do a lot with paypal outside of using it as a payment method. I rarely keep any money in it.
(I watched almost all of Season 1 of Yu-Gi-Oh! in one sitting....)
I have 6 more people's orders to do. These all require cartridge shells.
They may have to wait until next weekend. I have console mods to do before the end of today (Sunday).
The 18 of you who I have done today, your orders will be going out on monday as long as work doesn't dispatch me.
You should have gotten an email from paypal telling you they shipped. This is incorrect, I have created the shipping label which automatically marks it as being shipped.
Does anyone who already has an everdrive want to talk about what we need to do to prepare for these things? Specifically, what kind of (legal) roms do we need and in what file format, how the folders on our SD card should be structured, etc?
"Legal" roms? Lol, you own a copy nes and dump your own roms?
Originally posted by: sazyario
Originally posted by: MrNESGuy
Does anyone who already has an everdrive want to talk about what we need to do to prepare for these things? Specifically, what kind of (legal) roms do we need and in what file format, how the folders on our SD card should be structured, etc?
"Legal" roms? Lol, you own a copy nes and dump your own roms?
Well, or roms that people make on their own and release to the public for free. I'm sure NA doesn't condone the using of illegal roms and the decimation of information on how to use them.
Originally posted by: sazyario
Originally posted by: MrNESGuy
Does anyone who already has an everdrive want to talk about what we need to do to prepare for these things? Specifically, what kind of (legal) roms do we need and in what file format, how the folders on our SD card should be structured, etc?
"Legal" roms? Lol, you own a copy nes and dump your own roms?
Well, or roms that people make on their own and release to the public for free. I'm sure NA doesn't condone the using of illegal roms and the decimation of information on how to use them.
Well, Eric and I tried to get permission to use the NA logo on the Everdrive labels and we were politely told no. NA is already having some legal problems regarding roms and such.
NA doesn't want to officially be associated with pirating.
Only 6 more to do.
The sd2snes is a pain in the ass. Filing out the usb & sd card slot so close together is terrible. Plus filing the cart edge plastic to allow the extra pins.
I am in the market for a SD2SNES let me know if there are any extras.
That's not how this works