I need someone more manly/more of a handyman to help

Retroscribe81Retroscribe81
in Help Wanted!
So, I pretty much don't buy NES systems anymore.  Why?  Not because I can't sell them, more because I really feel that the pin connector should always be either boiled or replaced.



So, why don't I just replace them?  To be perfectly honest, I'm dumb as a brick when it comes to tools and how to use things.  I just used a pair of needle-nose pliers for the first time the other day.  I'm 30 years old and male.  How does this happen?



Anyway, so I've been using a regular old screwdriver to take apart NES systems.  And I just can't stand doing it.  It hurts my hands SO bad - I have a very weak grip and very weak forearms (probably the main reason I could never deadlift to save my lfie).  It literally hurts for days after I change a pin connector or two.



My question is this:



Are there any powered screwdrivers out there with an attachment long and small enough to get down in the NES holes to get the screws out?



If so, could you please link me and tell me EXACTLY what I need to look for/tell the person at Home Depot when I go to buy one?



Thanks!

Comments

  • BusdriverjBusdriverj
    I went specifically on Home Depots website to find these for you. Listed are the description and the part number. Cant get any easier for them (not you, you know what you want, they can be pretty dumb).



    The bit is long enough to get into any deeper hole. They do make longer but its 6" which is overkill for this application. The screwdriver isnt the strongest but it folds open so you can give it that extra twist to break them loose (and tighten if the battery is getting weak). it also comes with 4 normal bits so you dont have to use the long one all the time.



    Downfall is the screwdriver is wall charged. No batteries you can swap out. Just make sure you keep it charged and you should be good.



    Prices are fairly decent too, Screwdriver is $28 and the bit is $3.



    DEWALT 3-1/2 in. Tool Steel No. 2 Phillips Power Bit

    Model # DW2032 Z



    KAWASAKI 4.8-Volt Cordless Screwdriver

    Model # 840799
  • K.ThrowerK.Thrower
    I literally had the same bit pulled up. Jason is dead on. They have even cheaper drills like a $19.99 Black & Decker 3.6V that I use in my shop. It is not very powerful, but will disassemble and reassemble systems fine. Typical charge is 30 mins of life and 30 to recharge on these.

    http://www.homedepot.com/webapp/catalog/servlet/Search?keyword=cordless+screwdriver&selectedCatgry=SEARCH+ALL&langId=-1&storeId=10051&catalogId=10053&Ns=None&Ntpr=1&Ntpc=1#/?c=1&12ky=12ky
  • OtterOtter
    http://www.amazon.com/gp/aw/d/B002YG4N56.



    and a 3.6 volt black and Decker drill.
  • Holy-SNESHoly-SNES
    Forget the power tools, sounds like you need this...

    http://www.goldsgym.com/
  • SinNombreSinNombre
    I would invest in p90x instead of power tools!!! But I'm an ass...
  • MogMog
    Try the shake weight.
  • ulasamosaulasamosa

    Originally posted by: K.Thrower



    I literally had the same bit pulled up. Jason is dead on. They have even cheaper drills like a $19.99 Black & Decker 3.6V that I use in my shop. It is not very powerful, but will disassemble and reassemble systems fine. Typical charge is 30 mins of life and 30 to recharge on these.

    http://www.homedepot.com/webapp/catalog/servlet/Search?...



    I use a Black & Decker $20 special as well.  Works great.
  • MuthafodderMuthafodder
    MOD EDIT
  • GuntzGuntz
    Yeah, your senior years are gonna be really, really hard if you're that out of shape. Even going for a walk every evening can do wonders.
  • Retroscribe81Retroscribe81
    Having a weak grip and weak forearms has very little to do with physical fitness. I never said I was out of shape, I said I wasn't very man-stuff-oriented. Sorry to all of you manual labor hard-ass guys. My dad chose to be a total deadbeat so I never had the opportunity to learn how to fix/work on anything as a kid, so I had no interest in it as an adult. Why do something yourself when you can pay to have it done for you/make it easier on you?



    MOD EDIT



    I'd really love to see anywhere where it says anything about being lazy, out of shape, etc. I said my hands hurt because they're weak. I didn't say that I get out of breath walking up stairs, or that I couldn't bench 100 lbs.



    MOD EDIT
  • MuthafodderMuthafodder
    MOD EDIT



    Not sure what the point of your PM was...



    MOD EDIT



    FYI - I don't do manual labor for a living...I do it around my yard because I enjoy it.  MOD EDIT


  • ugly_monsterugly_monster
    C'mon guys, you're bringing down the vibe. It's a help wanted forum, if you don't want to help just stay out of his thread.



    Back on topic, Drills and electric screwdrivers are a time saver as well. Just be sure you get a magnetic bit because trying to put a tiny screw back in without the magnetic tip is much trickier.
  • RedivivusRedivivus
    We all know the FAQs here..



    Name Calling. Name-calling is verbal abuse directed toward an individual or a crude substitute for argument. The person you offended may not know you were joking, or perhaps English isn't their native language and they simply didn't "get it." Either way, name calling isn't acceptable behavior on NintendoAge.

    Negativity. Negativity includes meaningless complaining without being constructive. It also includes whining, thread-crapping, and any other words or actions that describe or display negativity.



    Answers have been provided. Mods, lock this shit up.



    Edit: In case anyone needs a damn refresher..

    http://www.nintendoage.com/pub/faq/NA/rules_general.html
  • BusdriverjBusdriverj
    Before it gets locked Id like to add something.



    I work with my hands for a living. Im a many time certified/master certified automotive technician. Ive used my hands my entire life. I could probably crush most peoples hands on this site with a hand shake but I didnt take any notice to the OPs complaint. I personally dont care. In the stereotype of a gamer, they are usually frail/overweight people. I dont care. I posted to help the guy, give him as much info as I could to help him work on consoles. Like mentioned above, this is the Help Wanted section. Its for HELPING people. If you wanted to bash him, wait for him to make this thread in the Everything Else section and have at it.



    To the OP, hope I was able to help.
  • GuntzGuntz

    Originally posted by: linktothepastgaming



    I'd really love to see anywhere where it says anything about being lazy, out of shape, etc. I said my hands hurt because they're weak.



    Except you're denying the only logical explanation for your weak hands. If you are reasonably healthy and don't have some kind of underlying physical condition (as you say), then the only way to have strong hands is to exercise them, like with the rest of your body.



    I don't do enough work with my hands to build a callous or a decent amount of durability, but I've become more tolerant of working with tools inside game systems because I've done it for a couple years now.



    Oh and about your comment about paying somebody to do things for you, I wish I had that kind of luxury. One of the reasons I mod/repair game systems is because I simply couldn't afford to pay someone else to do it. The markup is always too high in my opinion. The other reasons are "I'm a natural cheap ass" and "I developed an interest in modding/repairing things"
  • BenihanaBenihana
    Your right, this topic is going to be locked if you don't stay on topic. At a minimum, I am going to clean up the thread...and you better not go back there.

    We all know the rules...
  • Holy-SNESHoly-SNES
    I somehow feel I had something to do with this with my Golds Gym link.

    I didnt mean to start a debate about fitness so for whats its worth.... My apologies

    I know what you mean by your hands and foreamrs hurting.

    I played Guitar Hero the first time in about 2 yrs.

    I jumped stright back into expert thinking I was a good as I was then. 15 mins later, my right forearm started cramping and my left hand fingers ached.

    And like you said, it has nothing to do with being unfit, its just not using those muscles in that way very often to strengthen them.

    Anyways,

    As ppl suggested, get a small lightweight cordless.

    I would go Bosch because they're tough and reliable, but DeWalt make a really nice 7.2v cordless.. Maybe a little heavy for what you need though but still nice

    Spend a little more on a better one, you wont regret it. And grab some magnetic driver ends (long ones).

    Buy really good quality drivers also because you want these lasting and not becoming stripped.

    I would spend at least $100-$150 and get decent quality everything.
  • BenihanaBenihana

    Originally posted by: Holy-SNES



    I somehow feel I had something to do with this with my Golds Gym link.

    I didnt mean to start a debate about fitness so for whats its worth.... My apologies

     



    Friendly banter is fine...no worries unless somebody complains...

    The verbal attacks by others is what got this thread derailed.

    Your cool


  • VGS_captmorgandrinkerVGS_captmorgandrinker
    Back on topic, if you're using the power screwdriver just be careful when you're putting the NES back together, as if you tighten the screws too tight it'll distort the cart tray and not push down properly.



    Also, if there's anybody nearby who you can watch do a couple it'll help immensely. You have to fanaggle the new 72 pin a little bit to get it and the tray to both fit in like they should.
  • Retroscribe81Retroscribe81
    I think I've developed a reputation for taking lighthearted jabs at myself during my time here. A lot of people know me and of course the friendly banter is expected and even encouraged by me. But a guy whom I've never even heard of posts something completely irrelevant and pretty much personally attacking me? I just couldn't believe my eyes.



    Maybe I come off poorly on the forums and I've pissed off this guy in the past? I think most people here know I can have quite the ego at times, but I think it's also well-known that I'm not a troublemaker, either.



    I just don't see where it came from.



    I take some fun little jabs at myself, ask for help (which was given VERY graciously by quite a few folks, thank you), and the next thing you know, I need to get off my ass and do some manual labor or go to a gym.



    I dunno, to each their own. I prefer to get my exercise on the ice or on the inline rink. I hate manual labor and that's just how I am. I spent the money and the time, got my degree, worked my ass off, got to where I am now, and if that entitles me to not want to use a screwdriver, so be it.
  • PoloniusPolonius
    I'm going to echo captmorgandrinker's post and say - watch out for power tools torquing the crap out of what you're tightening. My wife calls me "Torque" for a reason.....
  • TWarwick07TWarwick07
    i would be hesitant to use power tools inside the nes , maybe for taking the casing apart but thats just my opinion
  • Mr.NintendoMr.Nintendo
    the former auction thread bubble bath babes is dragging it's manly self into this thread. LOL



    bubble bath boys . i am still in shock bill ha ha ha
  • rhetoric614rhetoric614
    I use a ratchet screwdriver (works like a socket wrench). While not powered, it is cheap and it makes things much faster and easier. Mine also fits the gamebits I ordered for opening carts (and other systems). There are tons of them out there just ask for a "ratchet screwdriver" at home depot and you should be able to find one that suits your needs.


  • DennisDennis
    If you use a heavy or not well designed tool your hands probably will hurt anyway because of the angle you`ll have to hold your hand and use your muscles. So choose wisely!
  • BusdriverjBusdriverj
    Well, it also helps if the get a large handled screwdriver. The bigger it is, the easier it is to apply enough torque to break it loose. I probably have about $30k in tools so Ive gotten spoiled to use high quality tools. Ive paid more for a single ratchet than most people are willing to spend on a Little Samson. If its your livelihood you pay more to make your life easier.

    But I personally think that electric screwdriver I listed earlier will more than suffice for your needs. It wont over torque the screws dunring reassemble but will def get the job done. Theres no need in you spending over $50 for something that you honestly wont use everyday.
  • VGS_captmorgandrinkerVGS_captmorgandrinker
    NES isn't too bad on your hands. Now if you have to open a 64, those are a bitch on your wrists.
  • MogMog

    Originally posted by: Polonius



    I'm going to echo captmorgandrinker's post and say - watch out for power tools torquing the crap out of what you're tightening. My wife calls me "Torque" for a reason.....







    Good electric drivers should have a clutch adjustment. Find the right setting for what you are screwing in, and you will not have to worry about over tighening.
Sign In or Register to comment.